SecureIt Tactical Vertical Kit

Specifications

• One stock base and 2 cradles
• Creates a 2-gun cabinet out of a FAST BOX

Fast Box purchased separately

Safe Installation:

1.Remove all or a portion of the stock safe interior. Set lower panel in place and mark holes with a Sharpie or other marker. Drill 1/4" pilot holes and insert anchors, then mount the panel. Mount the upper panel directly above the lower.

2.The drywall anchors are designed to be used in both gun safes and standard drywall (safe rooms or home vaults)

For Safe applications, cut the point off of the drywall anchors. Pre-drill 1/8" holes in the marked locations then insert the anchor with a Phillips screwdriver. Avoid power drivers as they can damage the anchor

3.Attach carriage bolts and wing nuts loosely to lower saddle then slide saddles into shelf slots on shelf.

The shelf is positioned in the safe so the rifles lean to the back and sit in the upper saddles.

4.Place upper saddles on back panel and adjust to fit your rifles and shotguns